HT-338 stainless steel cable tie tool

Model No.: CEC-E810

HT-338 Cable Tie Installation Tool for stainless steel ties (width up to 7.9 mm (0.03"), thickness up to 0.3 mm (0.01")
1) First thread the tail into the head of the cable tie.
2) Adjust the wheel to the required tension for the cable tie.
3) Place the tail and shaft of the cable tie into the solt at the tip of the gun barrel.
4) Push the tie as far back onto the gun base as possible. The head must be touching
the gun tip outside the tool.
5) Squeeze the handle of the gun to pull the tie through the head making sure the
head of the tie is always touching the tip of the gun.
6) Keep pulling the handle until the tie is securely fastened around the desired object.
7) The gun will automatically cut the excess tie off when it reaches maximum tension.